/
v.1.9.0 updated 07/17/2026
Damn it, I tried, but mistakes happen. Check if you don't want to fall into a trap!
cartz@phonoculture.com
Damn it, I tried, but mistakes happen. Check if you don't want to fall into a trap!
cartz@phonoculture.com
Hi!
Let me explain why you need notes. Just click on me
[Test Note] Check Empire 2000E/III on my setup
Benz-Micro Ace HS3
The Benz-Micro Ace HS3 comes from the Swiss workshop as a high output MC design. Its 2.5 mV output works into a standard MM phono input without extra gain. The MicroRidge stylus tracks between 1.6 and 1.9 g by specification. The stylus is integrated, so a worn diamond calls for retipping.
- Class:
Upper Mid-Range
- Mounting
- standard 1/2"
- Weight & Dimensions (H×W×D)
- 8.8 g
- Output Voltage
- 2.5 mV
- Recommended Load
- > 1,000 Ω
- Tracking Force
- 1.6–1.9 g
- Compliance Value
- 14 cu
Additional Info
The Benz-Micro Ace HS3 keeps an even-handed balance across the spectrum. Its MicroRidge profile pulls inner-groove information out cleanly, imaging stays tight and well-layered, and bass carries enough density to anchor rhythm without heaviness. Natural rather than clinical vocals make the controlled, articulate presentation easy to live with on classical and acoustic material. The stylus is integrated, so a worn tip means a retip.
Sound × Setup
Detail
82%IGD Control
79%Noise Suppression
81%Dynamics—Attack
78%Soundstage/Imaging
80%Bass Density
76%Vocals/Midrange
79%Forgiving Character
72%Tonearm mass medium 44%
light 44%·heavy 11%
Capacitance up to 100 pF 60%
100-200 pF 30%·from 200 pF 10%
Phono gain 43–46 dB 75%
35–38 dB 0%·39–42 dB 25%
Benz-Micro Ace HS3 (MC): Requires 43–46 dB gain (quality phono preamp essential). Medium-mass tonearm optimal for this low-output MC. Prefers low capacitance (<100pF). Excellent tracking, minimal noise. Ensure proper loading (100Ω standard). Best with quality isolation.
Collectors
Loading...
add 02/08/2026 · upd. 08/02/2026