Damn it, I tried, but mistakes happen. Check if you don't want to fall into a trap!
cartz@phonoculture.com
Hi!
Let me explain why you need notes. Just click on me
[Test Note] Check Empire 2000E/III on my setup
ADC P30 BD
The ADC P30 BD uses an induced magnet MI motor and sits in the entry level segment of the brand catalogue. Its 5.5 mV output feeds a standard MM phono input without any extra step up device. The conical stylus assembly carries the designation RP30 and the owner can swap it at home. Phono Culture lists one compatible replacement stylus, with tracking force rated from 1.0 to 2.0 grams.
The ADC P30 BD leans toward a relaxed, non-fatiguing presentation rather than analytical precision. Vocals come through with natural warmth, while dynamics and bass stay modest and gentle without much slam. Casual long sessions and softer genres on unfussy systems suit it well. The conical stylus is replaceable, so a fresh tip brings it back to form as it wears.
Replacement styluses for ADC P30 BD
LP Gear
RP-30 (ADC155)
Conical
Sound × Setup
Detail
42%
IGD Control
40%
Noise Suppression
38%
Dynamics—Attack
48%
Soundstage/Imaging
45%
Bass Density
44%
Vocals/Midrange
50%
Forgiving Character
72%
Tonearm mass medium 44%
light 44%·heavy 11%
Capacitance 100-200 pF 60%
up to 100 pF 20%·from 200 pF 20%
Phono gain 35–38 dB 75%
39–42 dB 25%·43–46 dB 0%
ADC P30 BD (MM) хорошо подойдёт к лёгкому тонарму — расчёт резонанса подтверждён на массах 8–18 г, все значения в оптимальной зоне 8–11 Гц. Ёмкость кабеля/фонокорректора держите около оптимальной зоны. Фонокорректор — вход MM, усиление 35–38 дБ. Оценка по податливости и массе — типичные значения (confidence medium/low), т.к. точные данные производителя отсутствуют.